Epoxy Anti Skid Flooring

Home | Our Products

Quick Enquiry

Epoxy Anti Skid Flooring

Epoxy Heavy Duty Anti Skid Flooring System



DESCRIPTION: Epoxy Screed is a solvent free highly filled three parts flooring screed. When applied on concrete surface, it gives a high strength flooring & tank lining, capable to withstand extremly high loading, wear and chemical resistance.

FEATURES: When used as flooring or tank lining screed mortar:

  • Forms seamless surface
  • Very high mechanical strength
  • Excellent chemical resistance
  • Hygienic
  • Dust free surface
  • Hard wearing
  • Anti-slip & anti-skid finish

Epoxy Screed is highly recommended, for use, for factory floor & workshop
Food & pharmaceuticals 
Chemical & Engineering.
Textile & Pulp-Paper,
Electronic industries.


Film Thickness 4-5 mm


9-11 kg/cm /M (Approx) 
Application Trowel 
Curing Initial-6-6-7 Hrs Full 7 days 
Finish Gloss
Mixing Ratio As directed on Packing
Colors Grey, Green, Red, Black, White or as required



SURFACE PREPARATION : Successful performance of Epoxy S/L or any other flooring system can achieve only after proper surface preparation. It is the prime requirement, that surface must correctly prepared before application.

  • New concrete or cementations surface must be cured for 28 days.
  • Surface must be free from any oils, grease, loose particles, curing aid chemicals, previously applied coating etc...
  • Surface must be fully dry.
  • For old surface all cracks, cavities should be repaired with Epoxy mortar
  • This is a very thin topping so can not level any irregularities of levels of the original sub-base. Therefore, it is most important to make original surface in line & level, before application of Epoxy Screed


PRIMER COAT: Apply one coat of Epoxy primer on properly prepared surface by brush and allow it to dry.

SCREED APPLICATION: First mix the resin part A, thoroughly with slow speed mixer until uniform color is achieved. Then add curing agent part B and mix again with mixer. After that, add filler par C and mix with mixer until a homogeneous, lumps free mass is achieved.
Then, place the mixed mortar evenly. Temp down with beam laid across steel screeding rails of specific height for desired thickness and finish with steel trowel to get smooth finish.

STORAGE: All the components Resin, Hardener & Filler must be kept in cool, dry place and in covered shed.

HEALTH & SAFETY: It is advisable to wear protective wears at the time of use of Epoxy Screed and all other our products. In case of contact with eyes and skin, wash with plenty of water and consut a doctor.

This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control. 



Rate this product
Review this product


For any kind of query, contact us with the details below.

  • Mr. Rahul Chauhan
  • +91 - 9737565945
  • info@epoxyfloorcoating.in
  • RC Corrocare Industries Pvt Ltd
    Plot No. 142, Rajdeep Industrial Co- Operative Estate Limited, Vatva-Narol Road Near Bibi Talav, Vatva
    Ahmedabad - Gujarat (India.) - 382445

Leave a message

Please fill in your info and we will contact you soon.