EPOXY FLOORING 3 mm System

Home | Our Products

Quick Enquiry

EPOXY FLOORING 3 mm System

EPOXY FLOORINGS 3 MM SYSTEM
 
 
 
     
 
 
EPOXY SELF LEVEL FLOORING :-
°
DESCRIPTION:

EPOXY S/L based on high performance epoxy resin & curing agents. This is a three-component system of
resin, curing agent and carefully graded high abrasion/chemical resistant fillers. Product is selfleveling to achieve excellent gloss, attractive, hygienic and very hardwearing & chemical resistant finish. 
 
°
FEATURES:

1) Being smooth, joint less and monolithic surface it is very easy to clean and to make it dust free.
2) Product is based on high performance epoxy resin & curing agent system. The flooring system has excellent overall chemical resistance at ambient temperature.
3) A carefully selected and graded high wearing aggregate gives very strong floor toppings to withstand normal foot and light vehicular traffic. System is available in many attractive colors.
 
°
APPLICATION: 

PRIMER COAT
Apply one coat of EPOXY S/L primer on properly prepared surface by brush and allow it to dry.

SELF LEVEL TOPPLING
First mix the resin part A, thoroughly with slow speed mixer until uniform color is achieved. Then add curing agent part B and mix again with mixer. After that add filler par C and mix with mixer until a homogeneous, lumps free mass is achieved. Then, pour it on primed surface and work with notched trowel to required thickness and apply spike roller to remove air. Proper mixing is the key factor to get uniform color and smooth surface.
 
° PRODUCT SPECIFICATIONS:

 Film Thickness  2-3 mm
 Coverage    3.35 to 2.9  kg//M2@APPROX.2MM XA.  (Approx.)
 Application  Notch Trowel & Spike Roller
 Curing  Initial-6-6-7 Hrs
 Finish  Gloss
 Mixing Ratio  As directed on Packing
 Colors  Grey, Green, Red, Black,
 White or as required

 
°
RECOMMENDED USES:

EPOXY S/L is highly recommended, for use, for extremely hygienic condition, chemical resistant and dust free areas like: Clean Room Food Processing Industries Pharmaceuticals Electronic Industries Hospitals etc.
 
°
METHOD OF APPLICATION:

SURFACE PREPARATION
Successful performance of EPOXY S/L or any other flooring system can achieve only after proper surface preparation. It is the prime requirement that surface must correctly prepared before application. ? New concrete or cementations surface must be cured for 28 days. ? Surface must be free from any oils, grease, loose partials, curing aid chemicals, previously applied coating etc…
1) Surface must be fully dry.
2)For old surface, all cracks, cavities should be repaired with EPOXY mortar.
3) This is a very thin topping so cannot level any irregularities of levels of the original sub-base. Therefore, it is most important to make original surface in line & level, before application of EPOXY S/L.
 
° STORAGE:

All the components Resin, Hardener & Filler must be kept in cool, dry place and in covered shed.
 
°
HEALTH & SAFETY:

It is advisable to wear protective wears at the time of use of EPOXY S/L and all other our products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control.

 
Other applications : Epoxy self level flooring, Epoxy garage flooring, seamless epoxy flooring, Epoxy flooring system, Epoxy stone flooring, Epoxy flooring tool, Epoxy resin flooring, Industrial epoxy flooring, Poured epoxy flooring, Epoxy flooring product, Epoxy aggregate flooring, Concrete epoxy flooring garage, Epoxy flooring marble, Epoxy flooring India, Cross epoxy flooring section

 

Rate this product
Review this product

CONTACT

For any kind of query, contact us with the details below.

  • Mr. Rahul Chauhan
  • +91 - 9737565945
  • info@epoxyfloorcoating.in
  • RC Corrocare Industries Pvt Ltd
    Plot No. 142, Rajdeep Industrial Co- Operative Estate Limited, Vatva-Narol Road Near Bibi Talav, Vatva
    Ahmedabad - Gujarat (India.) - 382445

Leave a message

Please fill in your info and we will contact you soon.